The animator 5v board is used on the street light products and city lights products. It does not have sound output.
Below is a schematic diagram of what pins on the pico are connected to the headers on the board.
The board has wire connections for the servo motors, switches, UART and neopixels.
Connections Street light and City lights
This table has the connections for the lightning and Christmas in the Park products.
| Function | Pico pin | Connect to | Wire length/gauge/color/dir |
| NeoPixels | GPIO10 | M1 | 6″ / 22/ Varies |
| Left switch | GPIO6 | SW1 | 10″ / 26 / BRN |
| Right switch | GPIO6 | SW1 | 10″ / 26 / BLU |
| Accessory Power 12-18 V AC/DC | NA | 12 – 18 V | Note: Connect to transformer only if not using 5v power supply. |